Go to previous page


The touchscreen can be used to either preset activation times or to operate the system manually.

When the system is operating, the LED in the climate control AUTO or A/C button flashes. AUTO indicates that the engine or cabin is being heated. A/C indicates the that cabin is being ventilated. The choice of operation is automatically determined by the system, depending on the external temperature.


The system ceases operation if the engine is started.

To access the TIMED CLIMATE screen, select Timed Climate from the EXTRA FEATURES page. See EXTRA FEATURES.

To control the timed climate system via the touchscreen:

  1. Power icon: Touch to switch the timed climate system on or off.

  2. + icon: Touch to access the ADD DEPARTURE screen.

  3. Departure time: Touch to edit a departure time.

  4. ON or OFF: Touch to switch a stored departure time on or off.

  5. Manual operation menu: Touch the ... icon, followed by Heat Now or Vent Now to manually operate the timed climate system. Touch Heat Now or Vent Now in the TIMED CLIMATE screen to switch off the timed climate system.

  6. Calendar icon: Touch to view the active departure times for the next 7 days.

  7. - icon: Touch to delete the stored departure time.

  8. Scroll bar: Touch the up and down arrows to scroll through the stored departure times.

Select the ADD DEPARTURE screen from the TIMED CLIMATE screen.

To set a single or repeated departure time:

  1. Hour: Touch to adjust the hour.

  2. Minute: Touch to adjust the minutes.

  3. Day: Touch to adjust the day.

  4. OK: Touch OK to set the departure time and days.

  5. Day selection: Touch to select the days that require the repeated departure time.

  6. Repeat soft key: Touch to enable the departure time to be repeated on other days. Touch again to cancel repeated departure times.


Make sure that the required departure times are switched on or off, as required, on the TIMED CLIMATE screen.


The time format, 12 or 24 hour clock, is determined by the time settings currently selected in the GENERAL SETTINGS menu. See GENERAL SETTINGS.