Go to previous page


Set the maximum opening height as required:

  • Open the boot to the position required as the maximum height. Press any boot button to stop movement at the required position. The final position can be achieved manually, if required.

  • Make sure the lid is stationary for at least 3 seconds.

  • Press and hold the close button for 10 seconds, to set the required opening height.

  • Close the boot, then open again, to check that it opens to the required height.

The maximum opening height is now set.


If, after performing part 3 of the process, the luggage compartment closes automatically, the required height has not been set. Repeat the process, making sure that all steps are adhered to.

To reset the maximum opening height, repeat the process, but when the boot reaches its current set height, manually move it to the fully open position before pressing and holding the button.

The powered boot may lose its position memory if there are multiple object detections or if the battery voltage is low. Powered operation may be inhibited.

To reset the boot:

  1. Manually close the boot.

  2. Press a boot release button.

  3. Allow the boot to power fully open, or to the previously set position.

  4. Press and release the close button.

  5. Allow the boot to power-close fully. The boot's programmed memory is now restored.