Go to previous page


The sensitivity of the Tyre Pressure Monitoring System (TPMS) can be adjusted between Normal Load and Heavy Load, via the Instrument panel menus, Vehicle Info, Tyre Pressures and TPM Load Setting. The ignition will have to be switched on, without the engine running. See MENÚ DEL CUADRO DE INSTRUMENTOS.

Every time the ignition is switched on, a TPMS message will be displayed in the Message centre, to indicate which load setting is being monitored. The message will be either TPMS SET HEAVY LOAD or TPMS SET NORMAL LOAD.


The TPMS setting must correspond with the vehicle's current load.

The Normal Load TPMS setting should be used during normal use of the vehicle, for example, up to 3 occupants and one luggage item. This setting may also improve the ride comfort, providing the weight restriction for passengers and luggage is not exceeded.

The Heavy Load TPMS setting should be used when the vehicle's load exceeds normal use and up to the Gross Vehicle Weight (GVW), for example, more than 3 occupants and one luggage item.


Make sure that the tyre pressures are correct for the vehicle's current load. See PRESIÓN DE INFLADO DE LOS NEUMÁTICOS.