Go to previous page



Child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses, or for attaching other items or equipment to the vehicle.


Always follow the child seat or restraint system manufacturer’s instructions when fitting tether straps.


When fitting a child seat or restraint system, always pass the tether strap over the top of the seat back and beneath the head restraint.

The vehicle is equipped with tether anchorage points, located behind the top of the second row seatback frames. These should be used to attach straps from child seats or child restraint systems.

Always fit the upper tether anchorage and tighten correctly.


Make sure that the rear seatback is securely and completely latched to the vehicle, in the normal upright position.

  • Pass the tether strap over the seatback and beneath the head restraint.

  • Release the access cover for the relevant tether anchorage point.

  • Attach the tether strap hook to the tether anchorage point. Make sure that the tether strap hook is facing the correct way.

  • Tighten the tether strap according to the child seat, or the child restraint, manufacturer's instructions.