Go to previous page



Park assist is a supplement to, and not a replacement for, good observation and a safe driving style. It is the driver's responsibility, at all times, to make sure that reversing manoeuvres are carried out safely.

Park assist may provide inaccurate results if:

  • The size or shape of the parking space changes after it was measured.

  • There is an irregular kerb alongside the parking space or the kerb is covered with leaves, snow, etc.

  • The vehicle is being used to transport a load that extends beyond the perimeter of the vehicle.

  • The vehicle had a repair or alteration that was not approved by a Dealer/Authorised Repairer.

  • The vehicle has been fitted with non-approved wheels or tyres.

  • One of the parked vehicles has an attachment at a raised height such as a flat bed truck, snow plough, or cherry picker.

  • The parking space is located on a corner or curve.

  • The sensors are dirty or covered in mud, ice, or snow.

  • The weather is foggy, raining, or snowing.

  • The road surface is bumpy such as gravel.

  • A tow bar or trailer hitch is fitted.

  • A trailer is connected.


    If a trailer is connected to a Jaguar approved trailer socket, the Park assist system will be disabled.

  • It encounters an obstruction that is thin or wedge shaped.

  • It encounters an obstruction that is elevated and/or protruding, such as ledges or tree branches.

  • It encounters an obstruction with corners and sharp edges.