Go to previous page


In the event of an electrical or mechanical failure, transmission operation will be limited. P, R, N, D, and S may still be used to enable the vehicle to be driven to a safe area.


The driver should be aware that the vehicle’s performance will be reduced and must take this into account when driving. Also, the use of the steering wheel mounted, gear shift paddles (Sequential shift) will be disabled. In this event, seek qualified assistance as soon as possible.

Some faults will cause the rotary gear selector to be locked in position until the ignition is switched off. If the selected range flashes, it signifies that the driver's request cannot be engaged. In this event, select N and then select the required gear change again.

If the transmission is still unable to select the requested gear, contact a Dealer/Authorised Repairer.