Go to previous page


The ACC system is operated by controls mounted on the steering wheel. The driver can also intervene at any time by the use of the brake or accelerator pedals.

  1. LIM: Press to switch between the Automatic Speed Limiter (ASL) and ACC. The systems cannot be used simultaneously. The ACC warning lamp will illuminate when ACC is active. See SISTEMA DE CONTROL DE VELOCIDAD (VERDE).


    When the vehicle's ignition is switched on, the previous state, either ACC or ASL, will automatically be recalled and activated. The set speed will not be recalled.

  2. SET +: Press to set the vehicle's current speed as the set speed. While ACC is enabled, further pressing of the button will raise the set speed above the vehicle's current speed. The speed of the vehicle will gradually increase to reach the new set speed.


    Dependent on the vehicle's specification, the set speed will be displayed as a marker on the speedometer or a numeric display in the Message centre. The set speed can also be displayed in the Head Up Display (HUD), if enabled. See PANTALLA DIGITAL DEL PARABRISAS (HUD).

  3. RES: Press to resume the ACC set speed after it has been disengaged.

  4. Press to decrease the Follow mode gap. See INTRODUCCIÓN DEL MODO SEGUIMIENTO.

  5. Press (-) to decrease the set speed. The speed of the vehicle will gradually decrease to reach the new set speed.

  6. Press to increase the Follow mode gap.

  7. CAN: Press to cancel but retain the set speed in the memory.