Go to previous page



Make sure the relevant safety warnings and cautions have been read and understood before operating the navigation system. See NAVIGATION SAFETY .


Due to the map data file size, it is recommended that a USB 3.0 memory device is used to update the map data.


The vehicle must be stationary to enable the map update to start. Once the update process has started, the vehicle may be driven.


The navigation system cannot be interacted with until the map update is complete. If a route was active before the map update started, the navigation guidance is limited to voice guidance only.


Internet connection is required when downloading online.

The map data in the navigation system can be updated by downloading the updated map data to a USB memory device.

To update the navigation system’s map data, please visit www.jaguar.com and search for 'Map Updates’.

To download to a USB memory device:

  1. Download the map data from the website to a USB memory device.

  2. Insert the USB drive into the USB socket.


    Only the USB sockets in the center console's storage compartment can be used for map updates. See AUXILIARY POWER SOCKETS.

  3. Follow the on-screen instructions to upload the map data to the navigation system.

Information on the installed maps is available in the NAVIGATION SETTINGS menu. See NAVIGATION SETTINGS .

For further information on updates to the navigation system's maps, visit www.jaguar.com and search for 'Map Updates'. Alternatively, contact an authorized retailer/authorized repairer.