Go to previous page

CONNECTING A MEDIA DEVICE

WARNING

Do not adjust the media device or allow the device to distract the driver while the vehicle is moving. Driver distraction can lead to accidents, potentially causing serious injury or death.

WARNING

Make sure that any media devices are stored securely while the vehicle is in motion. Any loose objects are potential hazards during sudden manoeuvres, emergency braking situations or accidents.

CAUTION

Read the manufacturer's instructions for any device, before it is connected to the media system. Make sure that the device is suitable, and comply with any instructions regarding connection and operation. Failure to do so may result in damage to the vehicle’s media system or the media device.

CAUTION

USB memory stick devices exceeding 70mm in length, must not be connected to the media hub. Using devices exceeding this length can result in damage to the media device or hub on closure of the cubby box lid on the centre console.

Portable media devices can be connected to the media hub, located in the centre console's cubby box. See STORAGE COMPARTMENTS.

Connect the device into the appropriate socket:

  1. HDMI/MHL socket.

  2. USB sockets.

NOTES

Use the cable supplied with your media device to connect to the USB socket.

NOTES

High quality cables are recommended to be used with Apple devices as this enhances the operation.

NOTES

A USB hub cannot be used to connect more than one USB device to the audio unit.

NOTES

Devices connected to the USB ports are charged, but devices that are fully discharged do not play.

Higher-rated devices that require more than 7.5W to charge may not display an indicator when charging. The devices still charge without the indicator being displayed.

NOTES

HDMI devices are not charged.

NOTES

Apple devices should be updated to the latest iOS version, otherwise, full support cannot be guaranteed.

NOTES

Voice command is only available for newer Apple devices, i.e., devices that are connected to the system via a lightning connector.

NOTES

Voice command will not operate devices connected to the system via Bluetooth®.

NOTES

Options, such as Repeat and Shuffle, relate to the device currently playing; they do not apply to any subsequent device. Previous Repeat and Shuffle selections are deactivated when a new queue is created.

NOTES

The available sockets vary, according to vehicle specification.

The SuperSpeed USB Trident Logo is a registered trademark of USB Implementer Forum, Inc.