Go to previous page


The windows need to be reset if the battery is disconnected, becomes discharged, or the power supply is interrupted.

Once the power supply is restored, reset the windows as follows:

  1. Close the window fully.

  2. Release the switch. Lift it to the close position and hold for 2 seconds.

  3. Release the switch.

  4. Repeat the lift and release procedure twice more.

  5. Test the window for correct switch operation. See ELECTRIC WINDOWS.

  6. Repeat the procedure on each window.


Make sure that a minimum of 12V is available at all times. It is recommended to have the electric motor switched on while resetting the windows.