Go to previous page

UNDER-BONNET COVERS REMOVAL

WARNING

High voltage cables may be exposed when removing the under-bonnet covers. Tampering with the high voltage system can cause severe burns or electric shock, which may result in serious injury or death. High voltage cables and connectors are coloured orange for identification purposes.

To remove the under-bonnet covers:

  1. Unscrew the turnbuckle clips (1) counter-clockwise and remove the upper cover.

  2. Press the three clips in and remove the coolant and brake fluid reservoir covers.

    NOTES

    Access the three clips via the three holes located below the covers.

  3. Gently pull the side covers, as illustrated, to release it from the luggage compartment.

  4. Lift and rotate the side covers clockwise to access the fuse box.

CAUTION

To prevent damage when moving the side covers, pay close attention to the position where the bonnet strut passes through the cover.