Go to previous page


The blind spot monitor system does not operate when:

  • Reverse (R) or Park (P) is selected.

  • The vehicle's speed is below 10 km/h (6 mph).

  • The radar sensors become blocked or stop working.

  • The door mirrors stop working.

  • An electrical connector is connected to a Jaguar Land Rover approved trailer socket.


    The blind spot monitor system remains disabled if a trailer is disconnected from the trailer socket while the engine is still running. Switch the vehicle's ignition off, then back on again, to enable the blind spot monitor system.

The blind spot monitor system:

  • Works most effectively on multi-lane roads.

  • Monitors an area of approximately 3.3 m from the side of the vehicle, and approximately 8.5 m behind the vehicle.

  • May register false targets if travelling along a narrow lane.

  • Does not work accurately if the sensors are misaligned due to bumper modifications, impact damage, etc.

The instrument panel and touchscreen display messages to inform the driver of any performance or system issues.