Go to previous page

LOW FRICTION LAUNCH

The low friction launch feature helps to further enhance low speed manoeuvring and pulling away from a standstill in adverse conditions.

Operation of the low friction launch feature is further enhanced if the rain ice snow driving mode is enabled. See RAIN ICE SNOW MODE.

The low friction launch feature also operates if the comfort driving mode is selected. See COMFORT MODE.

To enable the low friction launch feature, select the touchscreen's ASI Suite extra feature. Touch the Low Friction Launch soft key. Follow the on-screen instructions to meet the required vehicle conditions. Touch the Activate soft key. See EXTRA FEATURES.

NOTES

For vehicles without the ASI Suite extra feature, select the touchscreen's Low Friction Launch extra feature.

Alternatively, the touchscreen displays a pop-up menu, if the following conditions are met and the rain ice snow or comfort driving mode is currently selected:

In this event, select the required Yes or No soft key from the pop-up menu to enable or disable the low friction launch feature. Alternatively, touch the Do not show again soft key to disable the pop-up menu. The pop-up menu is also enabled and disabled via the low friction launch feature settings. See SYSTEM SETTINGS.

The low friction launch feature only operates at vehicle speeds below 30 km/h (19 mph). If this maximum speed is exceeded, the low friction launch feature is automatically disabled.

The low friction launch feature also automatically disables if:

  • The ASPC system enters full function mode, if ASPC is currently enabled.

  • The ECO or the dynamic driving mode is selected.

  • The accelerator pedal is quickly pressed down to a high level driving demand position.

  • A low friction launch system fault is detected. In this event, the instrument panel and the touchscreen displays a message.