Go to previous page

ADAPTIVE SPEED LIMITER

WARNING

Make sure the relevant safety warnings have been read and understood before driving the vehicle. See SPEED LIMITER SAFETY.

NOTES

The adaptive speed limiter does not operate if the traffic sign recognition system is not operating. See TRAFFIC SIGN RECOGNITION.

  1. LIM.

  2. SET+.

  3. RES.

  4. -.

  5. CAN.

Press the LIM button to switch the adaptive speed limiter on. Depending on vehicle status, the instrument panel displays either the speed limiter or the adaptive speed limiter information lamp.

If speed limiter is displayed, press and hold the CAN button. The speed limiter information lamp is replaced with the adaptive speed limiter information lamp to confirm that the adaptive speed limiter has been selected.

The adaptive speed limiter does not operate until activated. Press the SET+ button or the RES button to activate the adaptive speed limiter. The Head-Up Display (HUD) and instrument panel display the detected speed limits as icons.

NOTES

In some markets the Speed Limiter function is not applicable and therefore the LIM button will have no functionality.

If the adaptive speed limiter detects a speed limit lower than the current vehicle speed, it automatically slows the vehicle to meet the speed limit. Press the RES button to increase the rate of deceleration.

If the speed limiter detects a speed limit higher than the current vehicle speed, it allows the driver to accelerate up to the speed limit. Press the RES button to increase the rate of acceleration.

Press the CAN button to suspend adaptive speed limiter operation. Press the RES button or the SET+ button to resume adaptive speed limiter operation.

The adaptive speed limiter’s detected speed limit can be overridden if rapid acceleration is required. Fully press the accelerator pedal to accelerate past the adaptive speed limiter's detected speed limit. When the vehicle's speed drops below the adaptive speed limiter's detected speed limit, any speed limitations are reapplied.

The detected speed limit can be adjusted, if required, to control the vehicle’s speed at just above or below the detected speed limit. To adjust the detected speed limit:

  1. Press the SET+ button to raise the maximum vehicle speed 2 km/h (1 mph) above the detected speed limit. The maximum increase available is 10 km/h (6 mph) above the detected speed limit. Press and hold the SET+ button to raise the maximum vehicle speed directly to 10 km/h (6 mph) above the detected speed limit.

  2. Press the - button to lower the maximum vehicle speed 2 km/h (1 mph) below the detected speed limit. The maximum decrease available is 10 km/h (6 mph) below the detected speed limit. Press and hold the - button to lower the maximum vehicle speed directly to 10 km/h (6 mph) below the detected speed limit.

NOTES

Any adjustments to the detected speed limit are lost if the speed limiter is activated, or the vehicle’s electrical systems are switched off.