Go to previous page

SPEED LIMITER

WARNING

Make sure the relevant safety warnings have been read and understood before driving the vehicle. See SPEED LIMITER SAFETY.

  1. LIM.

  2. SET+.

  3. RES.

  4. -.

  5. CAN.

Press the LIM button to switch the speed limiter function on. The instrument panel displays an amber information lamp to confirm the speed limiter is selected. See SPEED LIMITER (AMBER).

The speed limiter does not operate until activated.

NOTES

In some markets the Speed Limiter function is not applicable and therefore the LIM button will have no functionality.

To activate the speed limiter, press the SET+ button. The vehicle's speed is now limited to the speed it was travelling at when the button was pressed. If the vehicle is stationary when the SET+ button is pressed, the system sets the speed limit to 30 km/h (19 mph).

Press and hold the SET+ button to increase the speed limiter's set speed in 10 km/h (or 5 mph) steps. Press and release the SET+ button to increase the speed limiter's set speed by 2 km/h (1 mph).

Press and hold the - button to lower the speed limiter's set speed in 10 km/h (or 5 mph) steps. Press and release the - button to lower the speed limiter's set speed by 2 km/h (1 mph).

Press the CAN button to suspend speed limiter operation. Press either the RES button or the SET+ button to resume speed limiter operation.

Pressing the RES button activates the previous set speed. Pressing the SET+ button limits the vehicle's speed to the speed it is travelling at when the button is pressed.

The speed limiter's set speed can be overridden if rapid acceleration is required. Fully press the accelerator pedal to accelerate past the speed limiter's set speed. When the vehicle's speed drops below the speed limiter's set speed, any speed limitations are reapplied.