Go to previous page



Make sure that the smart key is removed when leaving passengers in the vehicle. Removal of the smart key prevents unsupervised operation of the windows, which may result in injury.


Any ice must be removed from the windows before operating.


Each switch has a 2-stage operation. Lightly press or pull and hold to manually operate to the required position. Alternatively, press or pull fully and release for one-touch operation. Press the switch again to halt one-touch operation at any time.

  1. Window switches:

    Press the front of the switch to partially or fully open.

    Pull the front of the switch to partially or fully close.


    If a resonance or a booming sound occurs when a rear window is open, lowering an adjacent front window by approximately 25 mm eliminates the condition.


    The windows operate for 5 minutes after the engine is switched off, as long as none of the doors are opened.

  2. Rear window isolator and child safety locks. See CHILD SAFETY LOCKS.


    If children are carried in the rear seats, the isolator switch should be used to prevent operation of the rear windows.

  3. Sunblind button:

    Press the rear of the button to open.

    Press the front of the button to close.

Automatic roof blind:

The automatic operation of the roof blind can be adjusted via the climate settings screen on the touchscreen display.

When the feature is selected and the doors are locked, the roof blind closes automatically. When the engine is running, the roof blind returns to the previous open position.