Go to previous page



Make sure the relevant safety warnings have been read and understood before using the tool kit. Failure to comply with the safety instructions could result in an accident, leading to serious injury or death. See WHEEL CHANGING SAFETY.

The tool kit is located under the luggage compartment's floor panel.


Tool types and positions may vary from the illustration.

The location of the tools are as follows:

  1. Jack assembly. Observe the instructions printed on the jack.

  2. Jack handle.

  3. Wheel brace.

  4. Jack retaining screw.

  5. Clip.

  6. Locking wheel nut adaptor.


Examine the jack occasionally. Clean and grease the moving parts, particularly the screw thread, to prevent corrosion.


Take careful note of the storage position for each tool, as it is important to return the tools to their correct position after use.