Go to previous page

ENGINE START BACKUP

The engine start backup feature is required to disarm the alarm and start the engine, if either of the following occur:

  • The vehicle is unlocked using the emergency key blade.

  • The vehicle does not detect the smart key.

The engine start backup feature can only be used when the instrument panel displays Smart Key Not Recognized - Reposition or Place as shown and Press Start Button.

To carry out the engine start backup procedure:

  1. Position the smart key flat against the underside of the steering column.

    NOTES

    There are markings on the steering column to help locate the correct position.

  2. While holding the smart key in position, firmly press the brake pedal.

  3. Press and release the engine START/STOP button.

Once the engine starts, release the brake pedal, if it is safe to do so.

If the smart key is not recognized, or the engine fails to start, consult a retailer/authorized repairer.