Go to previous page

SURROUND CAMERA SYSTEM

WARNING

It remains the driver's responsibility to detect obstacles and estimate the vehicle's distance from them when manoeuvring the vehicle.

CAUTION

Some overhanging objects or barriers which could cause damage to the vehicle may not be detected by the camera.

CAUTION

The camera must be kept clean and free from debris or obstructions, for example, ice, frost, snow, leaves, mud, or insects. Failure to keep the camera clean may result in miscalculation or false indications. See SENSORS AND CAMERAS.

The surround camera system consists of four cameras, located as follows:

  • One is located in the centre of the front lower grille.

  • One is located underneath each of the exterior door mirrors.

  • One is located just above the rear number plate.

NOTES

The quality of the camera views may vary in different lighting conditions.

  1. Camera selection arrows: Left and right arrows for camera selection. If two images are already selected, the arrows become non-selectable.

  2. Camera selection arrows: Front and rear arrows for camera selection.

  3. 360° view: Touch to display a 'birds-eye' view of the vehicle and its immediate surroundings, using all four cameras.

  4. Cameras icon: Touch to select the cameras feature.

  5. Right or rear split-screen image: When presented as a split image, touching either image will switch to a full screen view of that image.

  6. Left or front camera split-screen image: When presented as a split image, touching either image will switch to a full screen view of that image.

  7. Settings icon: Touch to select the Camera Settings menu.

    Parking Guidance: Select OFF or ON.

    Parking Aid Graphics: Select OFF or ON.

    PDC Plan View: Select OFF or ON.

    NOTES

    Depending on the vehicle specification, the camera settings menu may include further camera settings. When the list includes six or more feature settings, a scroll bar is displayed.

  8. Parking aids icon: Touch to switch the parking aid graphics on/off.

  9. Camera icon: Touch to select a different camera view.

    NOTES

    A maximum of two views can be displayed at any one time (including the 360° view). To change a camera view if two views are already selected, one of the views has to be deselected first.

  10. Surround camera icon: Touch for a 360° view using all four cameras.

  11. Volume icon: Touch to mute the volume of the parking aid warning tones.

  12. Tow assist icon: Touch for trailer setup.

Camera shortcuts:

The function of the camera icon (4) varies, depending on the selected gear and the vehicle’s road speed, and gives the following options:

  • When in a forward gear, at speeds below 10 km/h (6 mph):

    Press once to select the T Junction View.

    Press twice to select the Rear Junction View.

    Press a third time to return to the T Junction View.

  • When in Neutral (N) or Park (P):

    Press once to select the Plan View.

    Press twice to select the T Junction View.

    Press a third time to select the Rear Junction View.

  • When in Reverse (R):

    Press once to select the Rear Junction View.

    Press twice to select the T Junction View.

    Press a third time to return to the Rear Junction View.

Pan and Zoom tools:

When in a full screen view of a camera image, touch the image to display the pan and zoom tools. This allows the image to be viewed at 3 levels of detail and can be manipulated left, right, up, and down. Double tap the image to jump to the middle level of zoomed detail and allow the same pan and zoom functionality.