Go to previous page

VEHICLE LOADING

When the vehicle is delivered, tire pressures will be set to those displayed on the tire pressure label. See TIRE PRESSURE LABEL.

The Tire Pressure Monitoring System (TPMS) can be adjusted for Light (comfort) load and Normal load. The TPMS can be adjusted via the Vehicle info, Tire information and TPM load setting instrument panel menus. See INSTRUMENT PANEL MENU.

NOTES

The vehicle's ignition must be switched on and the vehicle stationary.

NOTES

When the vehicle's ignition is switched on, the instrument panel displays a message to confirm that the light load setting is selected. No message is displayed if any other load setting is selected.

If the tire pressures are adjusted to the Light (comfort) load setting, the TPMS should be adjusted to suit the vehicle's load and associated recommended tire pressures.

NOTES

The TPMS setting must correspond with the current tire load.

The Light (comfort) load setting may only be used during use of the vehicle under light loading conditions, e.g., up to three occupants.

The Normal load setting should be used for heavier vehicle loading conditions up to the Gross Vehicle Weight (GVW), e.g., more than three occupants.

NOTES

Make sure that the tire pressures are correct for the vehicle's current load. See Linked procedure not present at the moment.

The instrument panel menus, Vehicle info and Tire pressures, can be used to check the vehicle's current tire pressures.