Go to previous page

MONTAGE VON KINDERRÜCKHALTESYSTEMEN MIT VERANKERUNGEN

WARNING

Always follow the child seat or restraint system manufacturer’s instructions when fitting tether straps. The child could be endangered in a crash if the child restraint is not properly secured in the vehicle.

WARNING

Always pass the tether strap over the top of the seatback and underneath the head restraint, when fitting a child seat or restraint. The child could be endangered in a crash if the child restraint is not properly secured in the vehicle.

WARNING

If a child restraint is fitted to the centre rear seat, the centre armrest must be moved to the stored position, in the seat's backrest.

WARNING

Always refit a removed head restraint after the child restraint is removed. The head restraint must be positioned correctly to restrain rearward movement of the head in a collision. An incorrectly adjusted head restraint increases the risk of death or serious injury in the event of a collision.

WARNING

Always store a removed head restraint securely. In the event of an accident, an unsecured object could cause serious injury or death.

Tether strap anchor points are located behind the rear seats. The anchor points should be used to attach tether straps from a child seat or restraint system.

To fit a tether strap:

  1. Fit the child restraint securely in the rear seat.

  2. Raise the head restraint.

  3. Pass the tether strap over the seatback and beneath the head restraint.

  4. Attach the tether strap hook to the anchor point. Make sure the hook is facing toward the rear of the seat.

  5. Tighten the tether strap according to the child restraint manufacturer's instructions.