Go to previous page

ANSCHLIESSEN EINES STARTHILFEGER√ĄTS

To start the vehicle using a starting aid or a slave battery, follow the instructions in the sequence given:

  1. Connect the positive (red) jump lead to the vehicle's positive (+) boost point terminal.

  2. Connect the negative (black) jump lead to the vehicle's negative (-) boost point terminal.

  3. Switch on the starting aid.

  4. Start the engine. Allow it to idle.

  5. Disconnect the negative (black) jump lead from the vehicle's (-) boost point terminal.

  6. Switch off the starting aid.

  7. Disconnect the positive (red) jump lead from the vehicle's (+) boost point terminal.