Go to previous page

ZWISCHEN DYNAMISCHER STABILITÄTSKONTROLLE (DSC) UND TRACDSC UMSCHALTEN

NOTES

If the vehicle's cruise control system is currently enabled, it automatically disables when Dynamic Stability Control (DSC) activates.

To switch between DSC and TracDSC, press and hold the DSC OFF button, located on the centre console, for less than 3 seconds. See DYNAMISCHE STABILITÄTSKONTROLLE (DSC) AUSSCHALTEN.

The instrument panel temporarily displays the TracDSC or the DSC on message to confirm selection.

The instrument panel illuminates the DSC OFF warning lamp while TracDSC is enabled, to confirm that DSC is disabled. See DYNAMISCHE STABILITÄTSKONTROLLE (DSC) AUS (ORANGE).

The amber DSC warning lamp flashes when DSC or TracDSC activates. See DYNAMISCHE STABILITÄTSKONTROLLE (DSC) (ORANGE).