Go to previous page

CHANGING A BULB

WARNING

If the exterior lights have just been switched off, give the bulbs time to cool. Handling them when hot may cause personal injury or death.

WARNING

Make sure to avoid touching any electrical connectors or circuit boards while changing a bulb. A possible residual electrical current could result in personal injury or death.

CAUTION

Always replace bulbs with the correct type and specification. Incorrect bulbs may cause the vehicle's lighting to malfunction. If in any doubt, contact a retailer/authorized repairer for advice.

CAUTION

Before attempting a bulb change, make sure that the ignition and the affected light are switched off. If the circuit remains live, a short circuit can occur, which may damage the vehicle's electrical system.

Bulb specification:

Not all bulbs are replaceable. The following bulbs can be replaced:

Variant Bulb description Specification
Halogen headlights. Dipped beam/High beam. HIR2
Daytime Running Lights (DRL). W21/5W
Halogen headlights. Front turn signal. PWY24W
Xenon headlights. Front turn signal. PWY24W
Rear fog lights. Rear fog light bulb. H21W

All other lights are either Light Emitting Diode (LED) or xenon units, and should only be replaced or serviced by qualified personnel.