Go to previous page

HEAD-UP-DISPLAY (HUD)

WARNING

Do not operate or adjust the Head-Up Display (HUD) system while the vehicle is moving. Doing so may cause driver distraction, potentially resulting in an accident and causing serious injury or death.

NOTES

The HUD system may take more time to display in extreme temperatures, allowing the system to operate at the correct temperatures.

NOTES

The full HUD image may not be viewed correctly while wearing polarised sunglasses.

NOTES

Do not place anything over the HUD unit, which is located on the driver’s side between the top of the instrument panel and the windscreen.

The HUD system projects some of the information currently displayed in the instrument panel onto the inside of the windscreen.

Use the Head-up display and Enable HUD instrument panel menus to switch the HUD system On or Off. See INSTRUMENTENTAFEL MENÜ.

The HUD system also displays some instrument panel warning lamps. See WARNLEUCHTEN UND ANZEIGEN.

Use the Head-up display and HUD content instrument panel menus to view a list of vehicle features for the HUD system to display. Select the required On or Off option for each feature. The HUD system only displays the vehicle features that are currently displayed in the instrument panel.

NOTES

The position and format of the displayed HUD information varies due to priority and the number of features currently switched on or off.

Setting the correct HUD position is important. The correct position is dependent on a number of conditions, including the height of the driver and the seat position.

NOTES

Before setting the position of the HUD, make sure that the driver's seat is correctly positioned. The HUD level should be set horizontally, within the driver's vision.

Use the Head-up display and Position instrument panel menus to set the HUD position. Follow the on-screen instructions to adjust the HUD position using the steering wheel controls. Press the OK button to confirm and exit the menu. Preferences are stored using the driver's seat memory store button. See MEMORYPOSITION.

The brightness of the HUD display is set automatically to suit the current ambient light conditions. To manually adjust the brightness, use the Head-up display and Brightness instrument panel menus. Follow the on-screen instructions to adjust the HUD brightness using the steering wheel controls. Press the OK button to confirm and exit the menu.

The speedometer units displayed in the HUD system are the same as the trip computer unit settings. See VERWENDEN DES BORDCOMPUTERS.

If cleaning is required, follow the cleaning instructions. See BILDSCHIRME UND DISPLAYS REINIGEN.