Go to previous page


  1. ON button.

  2. OFF button.

  3. Light Emitting Diode (LED) operation indicator.

  4. Antenna.


    Avoid touching the antenna when operating the ON or OFF button.

The remote control has an approximate range of 100 m. There is no need to point the remote control at the vehicle.

Press and hold the ON button for approximately 2 seconds.

The LED operation indicator signals various states and conditions for the remote timed climate. When a button is pressed, the LED illuminates green and then indicates the following status:

  • A series of short green flashes: Operation of the heater has been requested.

  • 12 long green flashes: The heater is switched on.

  • 12 long red flashes: The heater is switched off.

  • 18 short red flashes (in groups of 3 flashes): No communication with the receiver.

  • 12 short red flashes: There is an error.

If the LED operation indicator emits 6 short red flashes when a button is pressed, the battery in the remote needs to be replaced. See REPLACING THE REMOTE BATTERIES.

The remote timed climate program continues for 20-30 minutes, after which it switches off automatically to prevent the vehicle's battery from discharging. The remote timed climate program also switches off automatically if the engine is started.


The timed climate remote only operates once per engine start to maintain battery condition.