Go to previous page



Before closing a window, or the sunroof, make sure that no occupants have any body part in a position where it could be trapped. Even with an anti-trap system, death or serious injury could occur.


Closing a window or the sunroof onto any part of the body can result in serious injury.

Anti-trap protection is designed to stop window movement if an obstruction or resistance is detected. Check the window and its aperture, and remove any obstructions. The override procedure is as follows:

  1. Attempt to close the window. Anti-trap prevents closure and lowers the window.

  2. Within 10 seconds, attempt to raise the window again. Anti-trap prevents closure and lowers the window.

  3. Attempt to close the window for a third time. Hold the switch in the close position. The window raises while the switch is held. Hold until closed.


If this procedure fails to remove the blockage, or if the windows do not operate correctly, the window may need to be reset. See WINDOW RESET.