Go to previous page

LOADSPACE COVER

WARNING

Never place objects on top of the loadspace cover. During an accident or sudden maneuver, loose objects can cause serious injury or death.

CAUTION

To avoid any possible damage to the top surface of the loadspace cover, make sure nothing is trapped between the two halves when folding the cover.

To remove the loadspace cover:

  1. Release the two straps from the pins on the tailgate.

  2. Pull the loadspace cover back to release the locking pins.

  3. Lift the loadspace cover out of the locking pin guides.

Storing the cover:
WARNING

Do not store the loadspace cover loose in the vehicle. During an accident or sudden maneuver, the loadspace cover could cause serious injury or death.

Store the folded loadspace cover in the dedicated* storage area underneath the loadspace floor cover. *This is dependent on vehicle specification.

To store the cover:

  1. After lifting or removing the loadspace floor cover. Fold the loadspace cover and place it in the storage area as shown in the illustration.

  2. So that the lifting straps do not get trapped and damage the loadspace cover, locate the straps into the dedicated slots.

Refitting the cover:

To refit the loadspace cover:

  1. Locate the locking pins on the loadspace cover into the guide slots.

  2. Push back the loadspace cover to lock the cover into place.

  3. Fit the loadspace cover lifting straps over the pins on the tailgate.

  4. Pull down lightly on the straps until they click into place.