Go to previous page



When exiting the vehicle, always make sure of the following to protect the safety of those inside and outside the vehicle. Park (P) gear is selected. The engine is switched off. The Electric Parking Brake (EPB) is applied. The smart key is removed from the vehicle.


No modifications or additions should be made to the security system. Such changes could cause the system to malfunction.


The single locking setting should be used in circumstances when a window must be left open, e.g., if pets remain in the vehicle.


Always secure the vehicle when left unattended. Where possible, always secure the vehicle to the maximum available level of security.


In some markets, the full alarm system, including the alarm sensors, is armed when the vehicle is single locked. The alarm sensors can be enabled and disabled, for one alarm cycle only, via the Vehicle Settings menu. See INSTRUMENT PANEL MENU.

Briefly press the lock button on the smart key to lock the vehicle and arm the perimetric alarm. The hazard warning lights short flash once to confirm.

Before attempting to lock the vehicle always make sure of the following:

  • The ignition is switched off.

  • All of the doors, the windows, the bonnet, and the tailgate are closed correctly.

Single locking secures the vehicle and prevents the doors from being opened from the outside. The doors may still be unlocked and opened from inside the vehicle.

Once armed, the alarm activates if:

  • The bonnet, tailgate, or a door is opened.

  • The engine START/STOP button is pressed without a valid smart key present.

  • The vehicle's battery is disconnected (if a battery backed sounder is fitted).

  • An attempt is made to disconnect the battery back-up sounder (if fitted).