Go to previous page



The Parking aid system is not a substitute for driving safely with due care and attention. Drivers should not assume that this feature will correct errors of judgement while driving.


Parking aids may not detect moving objects, such as children and animals, until they are dangerously close. Always exercise extreme caution when maneuvering and always use the mirrors.


It remains the driver’s responsibility to detect obstacles and estimate the vehicle’s distance from them. Some overhanging objects, barriers, small children, animals, thin obstructions, or painted surfaces may not be detected by the system.


The Parking aid system may not function under all speeds, weather, and road conditions.


If accessories are fitted to the rear of the vehicle, particular care must be taken when reversing. The rear sensors will only indicate the distance from the bumper to the obstacle.

  1. Parking aid switch: Press to switch the system on and off.

  2. Parking aid detection range.

When Reverse (R) is selected, the rear parking sensors are activated automatically and the switch indicator will illuminate.

To switch off the system when active, press the switch; the switch indicator will extinguish.

The range of the Parking aid sensors varies between the rear and the corners of the vehicle.

Selecting Neutral (N) from R will keep the rear sensors active.

When the Parking aid system is active, a pop-up appears on the Touch screen showing a plan view of the vehicle and the immediate surrounding area. Touch Display Off to cancel the view.


When R is selected, the camera display is selected automatically.

When objects are detected, the Parking aid emits a warning tone which increases in frequency as the vehicle gets closer to the object and then becomes constant when the obstacle is within 12 ins (300 mm).