Go to previous page

USING THE TRIP COMPUTER

A short press (1 second or less), or a series of short presses, of the TRIP button will change the Trip computer display. The options available are:

  • Trip distance.

  • Trip average speed.

  • Trip average fuel consumption.

  • Instantaneous (short term average) fuel consumption.

  • Range available from remaining fuel.

  • Blank display.

  • Date.

NOTES

Except for the Date, and blank display, the options above can be enabled/disabled via the Instrument panel menus; Trip Computer and Trip Content.

The distance, average speed, and average fuel economy values, can be reset to zero for trip A, and trip B.

To reset a trip:

  1. Select the desired trip (A or B).

  2. Press and hold the TRIP button, for more than 2 seconds, while the message Resetting Trip is displayed.

It is not possible to manually reset the Auto trip memory. This resets automatically each time the ignition is switched on.

Trips may be added together in Auto, to record a continuous trip. Press the TRIP button for longer than 1 second, when Auto trip memory values for distance, average speed, and average fuel economy are displayed, then Adding Last Journey or Removing Last Journey will appear on the screen. Select the required option. Press the TRIP button for longer than 1 second, and the previous trip information will be added to, or removed from, the current trip, and the new total will be displayed. There is no limit to the number of times this can be done before the ignition is switched off.