Go to previous page

TOPPING UP THE WASHER FLUID

NOTES

National or local regulations may restrict the use of Volatile Organic Compounds (VOCs) which are commonly used as antifreeze agents in washer fluid. A washer fluid with limited VOC content should be used only if it provides adequate freeze resistance for all climates in which the vehicle is operated.

  1. Clean the filler cap before opening, to prevent dirt from entering the reservoir.

  2. Open the filler cap.

  3. Top up the reservoir with the specified washer fluid until the fluid is visible in the filler neck, see LUBRICANTS AND FLUIDS.

  4. Close the filler cap.