Go to previous page



Failure to use an oil that meets the required specification could cause excessive engine wear, a build up of sludge and deposits, and increase pollution. It could also lead to engine failure. Do not use low quality or obsolete oils.


Your vehicle warranty may be invalidated if damage is caused by using oil that does not meet the required specification.


Overfilling with oil could result in severe engine damage. Oil should be added in small quantities and the level rechecked to make sure that the engine is not overfilled.


Do not use oil additives, of any type as engine damage could occur. Use only specified lubricants.

  1. Unscrew the oil filler cap.

  2. Add oil, as indicated by the Message center display.

  3. Wait 5 minutes for the oil level to stabilize, and then recheck.

It is essential to use the correct specification oil, and to make sure it is suitable for the climatic conditions in which the vehicle is to be operated. See LUBRICANTS AND FLUIDS.

Jaguar recommends:

Castrol EDGE Professional