Go to previous page

LOCKING AND ARMING THE ALARM

WARNING

Before exiting the vehicle, always make sure that the gear selector is in the Park (P) position, the engine is turned off, the Parking brake is applied and the Smart key is removed from the vehicle.

CAUTION

Remove all Smart keys and emergency key blades from the vehicle when it is left unattended. This will help to prevent the alarm from being disarmed and; therefore, help to prevent theft.

NOTES

Before locking the vehicle, make sure that the hood, Luggage compartment and both doors are fully closed.

NOTES

The hazard warning lamps will flash once to confirm that the vehicle is locked. The handle of both doors will retract to the flush position. The Perimeter alarm will be activated, see PERIMETRIC ALARM.

Smart key locking:

  • Press the lock button to lock the vehicle.

Passive locking:

NOTES

Make sure the Smart key is within 3 ft (1 m) of the door handle.

CAUTION

The Smart key may not be detected if it is placed within a metal container, or if it is shielded by a device with a back-lit LCD screen such as a smart phone, laptop (including when inside a laptop bag), game console, etc.

  • Press the rear of the deployed door handle to lock the vehicle.