Go to previous page

REAR LIGHT BULB REPLACEMENT

Remove the relevant rear light. See REAR LIGHT REMOVAL.

The bulb locations are as follows:

  1. Reverse light.

Identify the location of the bulb to be changed and then follow the procedure below:

  1. Rotate the bulb holder, approximately 45 degrees counter-clockwise. Pull to remove it from the rear light.

    NOTES

    Note the orientation of the bulb holder to aid refitting.

  2. Pull the bulb to remove it from the bulb holder.

    NOTES

    Note the orientation of the bulb to aid refitting.

Reverse the whole removal process to fit a new bulb.