Go to previous page

SMART KEY BATTERY REPLACEMENT

Make sure the following warnings have been read and fully understood before using components with coin or button cell batteries. Failure to follow the guidance could result in serious injury or death.

WARNING

Chemical burn hazard. Batteries can cause severe internal burns within 2 hours of swallowing and may result in death. If it is suspected that a battery may have been swallowed or placed inside any part of the body, seek medical advice immediately.

WARNING

Keep new and used batteries away from children.

WARNING

If the battery compartment does not close securely, stop using the product and keep the product away from children.

When the battery needs replacing, there is a significant decrease in the effective range and the instrument panel displays Smart Key Battery Low.

  1. To remove the cover, slide in the directions of the arrows.

  2. Use the emergency key blade to separate the smart key's body.

  3. Remove the battery and press the upper positive terminal until the negative grid is touched. Upon recovering the position of the terminal, the coin cell shall have firm positive contact with the upper terminal.

  4. Fit a new and unused CR2032 type battery, available from a retailer/authorized repairer, with the positive (+) side upward.

  5. For cars with passive entry: after replacing the battery, allow 10 minutes for the internal battery to recharge before testing the smart key function.

NOTES

Avoid touching the new battery. Moisture or oil from fingers can reduce battery life and corrode the contacts.

NOTES

If the low battery warning does not extinguish, it indicates that the replacement battery is not in a new and unused condition.

Refit the parts in reverse order. Make sure that the parts click securely into place.

Battery disposal: Batteries contain harmful substances and must be disposed of correctly. Seek advice on disposal from a retailer/authorized repairer and/or the local authority.