Go to previous page

TAILGATE OPENING HEIGHT

The maximum opening height can be set as required. This is useful in parking areas with low ceiling heights or just for ease of use.

  1. Open the tailgate to the position which you want to set as the maximum height. Press the external tailgate control to stop movement.

  2. Make sure that the tailgate is stationary for at least 3 seconds.

  3. Press and hold the close button on the tailgate until a chime sounds, to set the opening height.

  4. Close the tailgate and open it again to check that it opens to the programmed height.

NOTES

If, after performing part 3 of the process, the tailgate closes automatically, the required height has not been set. Repeat the process making sure that all steps are adhered to.

Repeat the process, but manually move it to the fully open position before pressing and holding the button to reset the opening height to maximum.

The powered tailgate may lose its position memory if there are multiple object detections or if battery voltage is low. The powered operation may be inhibited. To reset the tailgate:

  1. Manually close the tailgate.

  2. Press a tailgate release button.

  3. Allow the tailgate to power fully open or to the previously set position.

  4. Press and release the tailgate close button.

  5. Allow the tailgate to power close fully.

The tailgate programmed position memory is now restored.