Go to previous page


  1. Parking aid icon: Touch to activate the parking aid feature.

  2. Settings icon: Touch to select the 360° PDC SETTINGS menu.

  3. Vehicle steering trajectory lines: Projected reversing path based on the current steering wheel position.

  4. Parking aid sensor detection zones:

    Grey blocks indicate objects detected that do not pose a threat (not in a collision path with the vehicle).

    Coloured blocks indicate objects detected that pose collision threats.

  5. Camera icon: Touch to select the 360° PDC (Park Distance Control) plan view and rear camera display.

  6. Volume icon: Touch to lower the volume of the 360° PDC beeps.


The 360° PDC feature is not available in some markets.


The parking aid and 360° PDC sensors do not detect moving objects, such as children and animals, until they are dangerously close. Always use extreme caution when manoeuvring.


The parking aid and 360° PDC sensors may not detect some obstructions, for example, narrow posts or small objects close to the ground. Objects above sensor level may not be detected, for example, when approaching a flatbed truck, the protruding part of the flatbed will not be detected.


If accessories are fitted to the rear of the vehicle, particular care must be taken when reversing. The rear sensors indicate only the distance from the bumper to the obstacle, or accessory if it is detected.


If a trailer is connected to a Jaguar Land Rover approved trailer socket, the rear sensors are disabled.

The parking aid and 360° PDC systems assist the driver while manoeuvring the vehicle at low speed in confined spaces. When active, object tracking along the front, sides, and rear of the vehicle, displays on the touch screen. The 4 side sensors provide the 360° PDC monitoring along the vehicle's sides, creating a virtual detection zone. While the vehicle is passing an object that is within sensor range, the vehicle's integrated systems calculate its trajectory within the 360° PDC monitored area and displays it on the touch screen.

If a detected object is calculated to be a collision threat, it is displayed in coloured blocks. A warning tone is given, which increases in frequency as the vehicle approaches the object. The tone becomes continuous when the object is within 300 mm of the vehicle.

Other detected objects are displayed as grey blocks.

While the vehicle is stationary, the sensors do not detect an object/person approaching from the side. Also, at vehicle start-up, the vehicle has no sensor information about side objects/persons. In both of these situations, ! displays on the touch screen in these virtual detection zones.

The front, side, and outer rear sensors monitor a fixed distance around the vehicle. The inner rear sensors monitor a greater distance at the rear of the vehicle.

The parking aid and 360° PDC system automatically activates when Reverse (R) gear is selected.

While the system is active and a forward gear is subsequently selected, the sensors remain active until the vehicle’s speed reaches 16 km/h (10 mph), at which point the system is disabled.


The parking aid disables if the vehicle's speed exceeds 16 km/h (10 mph).


The sensors must be kept clean to maintain accuracy and performance. See SENSORES Y CÁMARAS.