Go to previous page

INCONTROL PROTECT

InControl Remote Essentials:
WARNING

In the interests of safety, operate, adjust, or view the system only when it is safe to do so.

WARNING

Do not adjust the touch screen controls, or allow the system to distract the driver, while the vehicle is moving. Driver distraction can lead to accidents, causing serious injury or death.

NOTES

Not all smartphones are compatible. The Jaguar InControl Remote app is compatible with iPhone™ 5 running iOS7 and above, and Android phones running v4.0 and above.

Before using InControl Remote Essentials, the Jaguar InControl Remote app must be downloaded to the phone. The app can be downloaded from the Apple App Store or Google Play Store.

Downloading and installing.

  1. Search for the Jaguar InControl Remote app from the Apple App Store or Google Play Store.

  2. From the list of results, select Jaguar InControl Remote and install it.

  3. When the installation is complete, open the launcher and select the Jaguar InControl Remote icon.

  4. Follow the Quick Start Guide (QSG) instructions to complete the set-up.

NOTES

The availability and functionality of the app depends on the specification of the vehicle and the market in which the vehicle is used.

NOTES

Apps that are not suitable for use while driving, e.g., gaming apps, are not available on the Jaguar InControl Remote app.

NOTES

Apple and iPhone™ are registered trademarks of Apple Inc., registered in the US and other countries. App Store is a service mark of Apple Inc.

NOTES

Google Play Store is a registered trademark of Google Inc.

The Jaguar InControl Remote app allows for remote communication with the vehicle. The owner can check the vehicle's fuel level, the estimated range available, vehicle journey logs and the status of the doors and windows. The owner can view the last parked position of the vehicle, along with directions back to that position.

The Vehicle Status page is the home screen for the app. The following features can be selected:

  • Security Status,

  • Journeys,

  • Assistance,

  • Settings.

Security Status

The screen displays the open and closed status of all the doors and windows, and the current alarm setting.

Journeys

The screen displays the most recently completed journeys.

NOTES

The journeys feature can be enabled or disabled via the InControl Settings screen.

NOTES

Stored journeys can be viewed, deleted, or downloaded as a .csv file to assist with business expenses.

Assistance

The screen displays the vehicle's VIN and registration number. Direct calls can be made to the assistance centre, for breakdown assistance, and to the tracking call centre, in the event of a vehicle theft.

Settings

The screen allows the vehicle's security status, and the journey recording, to be switched on or off. Settings also allows access to your InControl account.

SOS Emergency Call:

There are two states of SOS Emergency Call: Automatic and manual operation.

In a crash situation where the airbags have been deployed, an automatic emergency call is made to the emergency services. In a non-crash situation, when emergency assistance is required, the emergency call button can be used manually.

In both states, the button flashes orange until the emergency services answer the call, at which point the flashing stops.

The vehicle's location, details, and the nature of the problem is automatically taken, and the appropriate emergency services are despatched to the vehicle's location. Contact with the emergency services agent can be made, at any time, by pressing the button.

The emergency call button is located in the overhead console. See MANDOS DEL CONDUCTOR.

Press and release the button's cover to reveal the button. The button is illuminated by a red LED. Press the button for 2 seconds to make a direct call to the emergency services.

After use, push the button's cover back into place.

NOTES

When the vehicle is travelling abroad, the SOS Emergency Call still connects. However, the vehicle’s location and the vehicle's details may not be automatically sent.

There are two back-up batteries that maintain full system operation, in the event that the vehicle's battery is disconnected or disabled. The batteries are guaranteed for 3 years. When the batteries require replacement, SOS Limited displays in the message centre. Consult a retailer/authorised repairer for replacement batteries.

When a fault is detected with the SOS Emergency Call system, the SOS Limited message displays in the message centre. Should this occur, the vehicle can still be driven, but consult a retailer/authorised repairer at the earliest opportunity.

Optimised Assistance Call:

The call button is located in the overhead console. See MANDOS DEL CONDUCTOR.

In the event of a breakdown, press and release the button's cover to reveal the button. The button is illuminated by a white LED. Press the button for 2 seconds to make a direct call to the assistance centre. The button flashes until the assistance centre answers the call, at which point the LED changes to yellow. The vehicle's details and current location are automatically relayed to the assistance centre.

The assistance centre then sends roadside assistance to the vehicle's location. The agent calls back to confirm the ETA. When the light flashes, push the button to answer the call.

After use, push the button's cover back into place.

Emergency Response in case of Accident (ERA GLONASS) test procedure.:

Applicable to Russia, Belarus and Kazakhstan only.

The test procedure determines if the system is working correctly.

Make sure that the following conditions are met before starting the procedure:

  • The Electric Park Brake (EPB) is applied.

  • The vehicle is stationary for a least 1 minute.

  • The ignition is switched on or the engine is running.

  • An emergency response call is not in progress.

  • Make sure that network reception is good.

Press the assistance call button for at least 3 seconds, but less than 10 seconds.

After pressing the assistance call button for 3 seconds, also press the emergency call button for at least 3 seconds.

The call button's LEDs flash amber until the test procedure ends. A call is made automatically to determine the current system status. When the system is faulty, SOS System Not Available displays in the message centre.

When all of the preparation conditions are met, and this message displays, contact your retailer/authorised repairer.

NOTES

The message also displays if there is no network reception. Move the vehicle to an area of good reception and retest.

The test procedure ends after 5 minutes if the ignition is switched off, or if the vehicle is driven more than 300 m.

NOTES

When the test procedure is repeated, make sure there is a time delay of at least 5 minutes before retesting.