Go to previous page

INSTALACIÓN DE ASIENTOS INFANTILES CON ANCLAJE PARA CORREAS

WARNING

Always follow the child seat or restraint system manufacturer’s instructions when fitting tether straps.

WARNING

When fitting a child seat or restraint system, always pass the tether strap over the top of the seatback and beneath the head restraint.

WARNING

If removing a head restraint in order to fit a child restraint, always secure the head restraint when storing it.

The vehicle is equipped with tether anchorage points, located behind the top of the second row seatback frames. These should be used to attach straps from child seats or child restraint systems.

Always fit the upper tether anchorage and tighten correctly.

WARNING

Make sure that the rear seatback is securely and completely latched to the vehicle, in the normal upright position.

  1. Install the child restraint securely in one of the rear seating positions.

  2. Raise the head restraint on the relevant outer rear seat position.

  3. Pass the tether strap over the seatback and beneath the head restraint.

  4. Release the access cover for the relevant tether anchorage point.

  5. Attach the tether strap hook to the tether anchorage point, making sure that the tether strap hook is facing the correct way.

  6. Tighten the tether strap according to the child seat, or the child restraint, manufacturer's instructions.