Go to previous page

DESMONTAJE DE LA LUZ TRASERA

See SUSTITUCIÓN DE UNA BOMBILLA.

Identify the location of the bulb to be changed and then release or remove the relevant luggage compartment access panel.

Right-side access panel:

Turn the securing lug 90 degrees counter-clockwise to release, then lower and lift to remove.

Reverse the removal procedure to refit.

Left-side access panel:

Turn the securing lug 90 degrees counter-clockwise to release and then pull to lower.

Reverse the removal procedure to refit.

Rear light removal:
  1. Continually rotate the rear light's securing bolt counter-clockwise until fully released, and then remove.

  2. Lightly press down and hold the rear light's securing lug and then carefully move the rear light a small distance away from the vehicle. This allows access to the rear light's electrical connection.

    CAUTION

    Do not completely remove the rear light from the vehicle until the vehicle's wiring loom has been released and disconnected. Doing so may damage the vehicle's wiring loom and the rear light.

  3. Release the vehicle's wiring loom from the rear light's securing lug.

  4. Press and hold the securing lug at the base of the electrical connector and then pull to release it from the rear light.

  5. Completely remove the rear light from the vehicle.

    CAUTION

    Make sure that the rear light is placed on a soft surface that will not damage or scratch the rear light lens.

Reverse the removal procedure to refit.