Go to previous page

POSICIÓN DE SERVICIO DE LOS LIMPIAPARABRISAS

CAUTION

To avoid damage to the bonnet, do not lift the wiper blades when they are in the normal parked position.

NOTES

The smart key must remain in the vehicle while the wiper blades are being replaced.

NOTES

Fit only replacement wiper blades that are identical to the original specification.

NOTES

Replace the wiper blades in accordance with the manufacturer's instructions.

Before changing a wiper blade, the wiper arms must be set in the service position as follows:

  1. Make sure the vehicle's ignition is switched off.

  2. Switch the vehicle's ignition on and then off again.

  3. Immediately press the wash/wipe control to its lowest position, as if to command a single wipe. Hold this position while switching on the vehicle's ignition again. The wipers move to the service position. See FUNCIONAMIENTO DEL LIMPIAPARABRISAS.

  4. When the new parts have been fitted, switch the vehicle's ignition off. The wipers return to the park position.