Go to previous page

PUNTOS DE ANCLAJE ISOFIX E I-SIZE

WARNING

Do not attempt to fit ISOFIX or i-Size child restraints to the centre rear seating position. The anchor bars are not designed to hold an ISOFIX or i-Size child restraint in this position.

WARNING

If the restraint is not correctly anchored, there is a significant risk of injury to the child in the event of a collision or emergency braking.

WARNING

If removing a head restraint in order to fit a child restraint, always secure the head restraint when storing it. Always refit a removed head restraint after the child restraint is removed.

WARNING

WARNING: child restraint anchorages are designed to withstand only those loads imposed by correctly fitted child restraints. Under no circumstances are they to be used for adult seat belts, harnesses or for attaching other items or equipment to the vehicle.

Both of the outer rear seat positions are equipped to accept ISOFIX and i-Size child restraints.

This symbol is shown, on the removable access cover, to indicate the position of the ISOFIX/i-Size lower anchorages.

To install an ISOFIX or i-Size child restraint:

  1. Raise the head restraint on the relevant rear outer seat position.

  2. Locate the recess at the top of each access cover, lightly pull forward to release and remove. This will now allow access to the vehicle's lower anchor bars.

    NOTES

    Store the access covers safely and refit when the child restraint is removed from the vehicle.

  3. Slide the child restraint locking mechanism onto the vehicle's anchor bars and then push the child restraint towards the rear of the vehicle, to make sure of complete engagement.

  4. Test the security of the child restraint. To do this, attempt to pull the child restraint away from the vehicle's seat and twist the child restraint from side to side. Even if the child restraint appears secure, you should always check the anchor points visually to confirm correct attachment.

    WARNING

    If the child restraint is not correctly anchored, there is a significant risk of injury to the child in the event of a collision or emergency braking.

    NOTES

    Always make sure that if an upper tether is provided, it is fitted and tightened correctly.

    NOTES

    For child restraints fitted with a support leg, adjust the leg so that it rests firmly on the floor.

ISOFIX child restraint system seating positions:
NOTES

The information contained in the following table may not be applicable to all countries. If you are in any doubt regarding the type and fitment of child seats, seek advice from a Dealer/Authorised Repairer.

Mass group as shown on the child restraint Size classes Fixtures Second row outboard seats Recommended child restraint system
Carrycot F ISO/L1 X -
G ISO/L2 X -
0 Up to 10 kg (22 lb.) 0 to 9 months E ISO/R1 IL Britax/Römer Baby Safe Plus with Baby-Safe ISOFIX Base
0+ Up to 13 kg (29 lb.) 0 to 18 months E ISO/R1 IL
D ISO/R2 IL -
C ISO/R3 IL -
I 9 to 18 kg (20 to 40 lb.) 9 months to 4 years D ISO/R2 IL -
C ISO/R3 IL -
B ISO/F2 IUF Britax/Römer Baby Duo Plus
B1 ISO/F2X IUF
A ISO/F3 IUF
II/III 15 to 36 kg (33 to 80 lb.) 4 to 12 years - - - -
  • IUF = Suitable for ISOFIX forward child restraint systems of universal category, approved for use in this mass group.

  • IL = These ISOFIX child restraint systems are of the specific vehicle, restricted or semi-universal categories.

  • X = Not suitable for ISOFIX child restraint fitment in this mass group.

NOTES

Ages given are approximate. In case of doubt, the child’s weight, not age, should be used when considering an appropriate child seat.

i-Size child restraint system seating positions:
NOTES

The information contained in the following table may not be applicable to all countries. If you are in any doubt regarding the type and fitment of child seats, seek advice from a Dealer/Authorised Repairer.

Seating position
  Front Passenger Rear outboard left Rear outboard right Rear centre
i-Size child restraint system X i-U i-U X
  • i-U = Suitable for i-Size universal child restraint systems, forward and rearward facing.

  • X = Seating position not suitable for i-Size universal child restraint systems.