Go to previous page

SENSOR DE LLUVIA

The wiper's rain sensor (if fitted) is mounted on the inside of the windscreen, behind the rear-view mirror. The sensor is able to detect the presence and amount of water on the windscreen, and automatically activate the windscreen wipers accordingly.

NOTES

Static droplets may not be detected on initial start-up. A single wipe should be used to clear the windscreen.

NOTES

The Wiper Rain Sensor can be enabled/disabled via the Vehicle Set-up menu. See MENÚ DEL CUADRO DE INSTRUMENTOS.

To activate the rain sensitive wipers, move the wiper/washer control to the AUTO position. The behaviour of the system may be adjusted to the driver's preference by rotating the collar (2).

NOTES

If the wiper/washer control is turned to the AUTO position, the wipers will not operate if either of the front doors are open.

NOTES

In dry and often sunny conditions, optical influences and dirt accumulation on the windscreen may result in the windscreen wipers activating inadvertently. To prevent this, it is recommended that, under these conditions, the wiper/washer controls are returned to the OFF position.