Go to previous page

ACTIVACIÓN DEL SISTEMA DSC

To switch DSC on, press and release the DSC OFF button.

The DSC system will switch on and the Message centre will temporarily display DSC ON.

The DSC OFF warning lamp will extinguish to confirm that DSC is enabled. See CONTROL DINÁMICO DE ESTABILIDAD (DSC) DESACTIVADO (ÁMBAR).

NOTES

Switching the engine off and then on again, will always revert the DSC status to DSC ON, regardless of which mode is selected.

The DSC warning lamp will flash when DSC is active (Cruise control will automatically disengage if this occurs). See CONTROL DINÁMICO DE ESTABILIDAD (DSC) (ÁMBAR).