Go to previous page

DESMONTAJE DE LA LUZ TRASERA

See SUSTITUCIÓN DE UNA BOMBILLA.

Identify the location/s of the bulb/s to be changed and then release/remove the relevant luggage compartment access panel.

Right side access panel:

Turn the retaining lug, 90 degrees counter-clockwise, to release, then lower and lift to remove.

Reverse the removal procedure to refit.

Left side access panel:

Turn the retaining lug, 90 degrees counter-clockwise, to release and then pull to lower.

Reverse the removal procedure to refit.

Rear lamp removal:
  1. Continually rotate the rear lamp's retaining bolt, counter-clockwise, until fully released and then remove.

  2. Lightly press down and hold the rear lamp's retaining lug and then carefully move the rear lamp a small distance away from the vehicle. This will now allow access to the rear lamp's electrical connection.

    CAUTION

    Do not completely remove the rear lamp from the vehicle until the vehicle's wiring loom has been released and disconnected, as this may damage the vehicle's wiring loom and the rear lamp.

  3. Release the vehicle's wiring loom from the rear lamp's retaining lug.

  4. Press and hold the retaining lug at the base of the electrical connector and then pull to release it from the rear lamp.

  5. Completely remove the rear lamp from the vehicle.

    CAUTION

    Make sure that the rear lamp is placed on a soft surface that will not damage or scratch the rear lamp lens.

Reverse the removal procedure to refit.