Go to previous page

POSICIÓN DE SERVICIO DE LOS LIMPIAPARABRISAS

CAUTION

To avoid damage to the bonnet, do not lift the wiper blades when they are in the normal parked position.

NOTES

The Smart key must remain in the vehicle while the wiper blades are replaced.

Before changing a wiper blade, the wiper arms must be set in the 'service' position as follows:

  1. Make sure the ignition is turned OFF.

  2. Turn the ignition ON and then OFF again.

  3. Immediately press the wiper stalk to its lowest position (as if to command a single wipe, see FUNCIONAMIENTO DEL LIMPIAPARABRISAS), hold this position while turning ON the ignition again.

    The wipers will move to their service position.

  4. When the new parts have been fitted, turn the ignition OFF. This will return the wipers to the park position.

NOTES

Fit only replacement wiper blades that are identical to the original specification.