Go to previous page

USO DEL ORDENADOR DE VIAJE

A short press (1 second or less), or a series of short presses of the button will change the trip computer display. The options available are:

  • Date and Odometer.

  • Trip distance.

  • Average speed.

  • Average consumption.

  • Instantaneous consumption.

  • Distance to empty.

  • Driving style.

  • ECO data system status display.

NOTES

These options can be enabled/disabled via the Instrument panel menu (Select Trip Computer and then Trip content), except for the ECO data system's status display and the Date and Odometer options.

To reset the trip computer values to zero, press and hold the button for 2 seconds.

To reset the fuel consumption value, press and hold the button until the display clears.

The distance, average speed, and average fuel economy values for trip A and trip B can be reset. Set the trip computer display to show the trip that you wish to reset, then press and hold the button until the message Resetting trip is displayed.

It is not possible to manually reset the Auto trip memory. This resets automatically each time the ignition is switched on.

Trips may be added together, or removed, to record a continuous journey. Press the button for longer than 1 second, when Auto trip memory values for distance, average speed, and average fuel economy are displayed, then Adding last journey or Removing last journey will appear on the screen. Press the button for longer than 1 second, and the previous trip information will be added to, or removed from, the current trip and the new total will be displayed. There is no limit to the number of times this can be done before the ignition is switched off.